4900 Ambroise-Lafortune
Boisbriand, Quebec, J7H 1S6


Featuring a heat symmetric basic frame with a high-grade cast iron base to ensure twist rigidity against spindle head motion, this micro-fine machine delivers unsurpassed speed and accuracy for the most complex contours. Two horizontally opposed flat linear motors equipped with powerful magnets ensure clearance in the side ways to cancel out any attraction forces. A dual-layer cooling system, an in-line oil chiller unit and a centralized exhaust and outside airflow system ensure that hot air will never collect at the spindle. Operation is easy thanks to the Super PC X + control with 10 different modes for convenient customization.


Machine Travels: X x Y x Z in (mm) 17.7 x 13.8 x 7.9 (450 x 350 x 200)
Spindle Speed 3,000 ~ 60,000 RPM
Table Size X- Y: in (mm) ±0.000039/±0.0000079 (±1.0/±0.2)
Spindle HP 5.0
Spindle Lubrication Oil Mist
Tool Changer Size 20 Position Standard
Positioning Accuracy/Repeatability: in (μm) ±0.000039/±0.0000079 (±1.0/±0.2)
Table Work Area X x Y: in (mm) 21.6 x 13.8 (550 x 350)
Table to Spindle Nose Distance: in (mm) 3.15 ~ 11.02 (80 ~ 280)
Max. Workpiece Weight: lb (kg) 220 (100)
Table Height from Floor: in (mm) 29.5 (750)
745 Hole Positioning Accuracy: in (μm) ±0.00006 (±1.5)
Spindle Taper HSK-E25
Spindle Air Purge Standard
Air Blast through Spindle NA
Oil Mist with Collector Optional
Linear Scales X, Y, Z - axes Heidenhain 0.002µm (2nm) Standard
Rapid Traverse Speed: in/min. (m/min.) 590 (15)
Cutting Speed (Normal Mode): in/min. (mm/min.) 0.04 - 394 (1 ~ 10,000)
Cutting Speed (GR Super PC Mode): in/min. (m/min.) 590 (15)
Dust Collection System NA
Coolant Tank Capacity: gal (L) 52.8 (200)
Machine Weight: lb (kg) 12,787 (5800)
Machine Height: in (mm) 94.9 (2410)
Required Floor Space [Mach. Unit]: in (mm) 83.0 x 113.4 (2110 x 2880)
Control Unit Fanuc 31i-B5 Super High-Speed Processor and Al Contour Control II and Super PC X Function
Power Requirements KVA 200 ~ 220V 19.0 kVA
Air Supply 9 cu.ft./min @ 72 psi


For years, tool, die and mold makers have relied on EDM to produce tools in hardened steels that were difficult or impossible to machine. As pressure builds to cut lead times and streamline processes, EDM adds an extra step to the metal cutting process to improve overall productivity. So when machining directly into hardened steel, roughing and finishing molds and dies on a machining center in one set-up has become increasingly attractive in terms of efficiency. High-speed machining technology has progressed rapidly over the last few years and is ready to take on this task using high RPM spindles, extremely accurate Linear Motor Servo Drive Systems, high-speed machine controllers and advanced cutting tool coatings. Roku-Roku, a specialty machine tool builder known for making high quality and extremely accurate machines, researched and incorporated all of these technologies into the ANDROID model. The ANDROID is a machining center designed from the ground up for extremely precise, hard steel machining at high spindle speeds and high traverse rates - “high velocity” machining. Here are some of the features that set the ANDROID apart. The Roku-Roku ANDROID is an exceptionally well-built machine tool coupled with the Fanuc 31i-B5 CNC Controller. Roku’s Super PC X + optimizes velocity and acceleration/deceleration through the use of a super high-speed processor and AI Contour Control II, High Speed processing, Nano Smoothing and Look Ahead Block Expansion. The combination of high-speed calculation and read ahead control minimizes geometric errors during high-speed contouring of continuous small motion commands. Super PC X + can be set to one of 10 different modes to meet your machining requirements. The Roku-Roku ANDROID also features Fanuc’s Digital Intelligent Servo System with five-place decimal input and feedback. This combination results in unsurpassed speed and accuracy, even in the most complex, three-dimensional contours consisting of short consecutive line segments or arcs.


  • X-, Y- and Z-Axes Linear Motor Drive System
  • Z-Axis Thermal Growth Compensation
  • Special Precision Roller Type Linear Motion Ways
  • Auto Lubrication
  • Full Enclosure
  • Special Way Covers Reduce Motion Resistance
  • 60,000-RPM Integral Motor Spindle
  • Spindle Chiller
  • Non-contact Tool Measurement (Blum laser) with air blow
  • 53-gallon (200L) Coolant Tank
  • 20-Position Automatic Tool Changer
  • X-, Y- and Z-Axes Linear Scales
  • Tool Tightening Block
  • Automatic Power Shut Down Circuit
  • Work Washer Gun
  • Air Purge
  • 10.4-inch Color Monitor
  • Two-Stage Patrol Lamp (Yellow, Red)
  • Manual Handle Feed
  • One Machine Lamp (LED)
  • Tool Box
  • Maintenance Kit
  • Leveling Bolts and Pads
  • Super PC X + Function (10 Mode Operation)
  • AI Contour Control II, High Speed processing, Nano smoothing and Look ahead block expansion
  • Editable Data Server with 2GB Program Storage (Flash Card type)
  • Ethernet with TCP/IP Protocol & RS232 Communications
  • 160 Meters Memory (64KB)
  • Custom Macro B
  • Parts Count & Run Hour Display
  • Helical Interpolation

Plan / layout

Fastest response times on consumable orders

We have Canada’s largest inventory of waterjet garnet abrasive and replacement parts for waterjet cutting machines and EDM consumables

order now

test cut

We will perform a test cutting and ajust our machine according to your precessing requirements.

Ask for a test