Mitsubishi Milling

Featuring a heat symmetric basic frame with a high-grade cast iron base to ensure twist rigidity against spindle head motion, this micro-fine machine delivers unsurpassed speed and accuracy for the most complex contours. Two horizontally opposed flat linear motors equipped with powerful magnets ensure clearance in the side ways to cancel out any attraction forces. A dual-layer cooling system, an in-line oil chiller unit and a centralized exhaust and outside airflow system ensure that hot air will never collect at the spindle. Operation is easy thanks to the Super PC X + control with 10 different modes for convenient customization.

The CEGA SS-300 features a high-rigidity, bridge-type monoblock structure for a guaranteed static positioning accuracy of ±0.000060" and ±0.000020" repeatability. An oil-mist lubricated spindle and a 20-HP AC spindle motor offer a wide speed range of 200 to 30,000 RPM. The new HSK-E25 tool holder improves clamping force by up to six times while the Z-axis Balance Cylinder reduces the load for ball screw and servo motor. Operation is easy with the Fanuc 31i-B5 Super High-Speed Processor with AI Contour Control II and NANO Interpolation.

When it comes to mold and die applications and close tolerance work, nothing beats the DM-1200G featuring a rigid and highly-precise 20,000-RPM HSK-A63 spindle. The 24-position automatic tool changer extends tool life and increases productivity while X-Y-Z linear glass scales and roller pack LM guide-ways improve machining quality and output.

Designed to excel at mold and die applications and close tolerance work, the DM-800G features a rigid and highly-precise 20,000-RPM HSK-E40 spindle for intricate work. The 24-position automatic tool changer extends tool life and increases productivity while X-Y-Z linear glass scales and roller pack LM guide-ways improve machining quality and output.

Ideal for mold and die applications and close tolerance work, the DM-800~1600 features a rigid and highly-precise 20,000-RPM HSK-E40 spindle tooling system for intricate work. The 32-position automatic tool changer extends tool life and increases productivity while X-Y-Z linear glass scales and roller pack LM guide-ways improve machining quality and output. Operation is quick and easy thanks to the Mitsubishi M830S control with 15-inch touchscreen and new CNC-Dedicated CPU providing up to 270,000 BPM (block per minute) calculation speed.

A true workhorse for general-purpose machining, the DV series from Mitsubishi features a 15,000-RPM Direct Drive Spindle and can accommodate smaller cutting tools for more intricate milling work when required. Operation is quick and easy thanks to the Mitsubishi M80A control with 15-inch touchscreen and new CNC-Dedicated CPU providing up to 135,000 BPM (block per minute) calculation speed.

Compact for smaller graphite electrode and mold/die component production, the Eagle V5 is available in a 3-axis or a 5-axis configuration with an ATC capacity of up to 100 tools. This ultra-rigid vertical machining centre can handle a 550-pound workpiece on a 15.75-inch table surface. Equipped with a 42,000 RPM integrated spindle, heavy-duty, linear roller guideways and a Dual Gantry Drive, the Eagle V5 is ideal for inclined surface, spiral contour, irregular contour and other complex machining tasks. Includes a Heidenhain iTNC-530 control unit and a side opening for robot loading from either side with pallets up to 15.7-inch square.

With a patented removable table to create a much larger 3-axis machining area, the ultra-rigid Eagle V9 5-axis vertical machining centre can easily handle a 1,100-pound workpiece on a 23.6-inch table surface. Equipped with a 36,000 RPM integrated spindle, heavy-duty, roller-type linear guideways and a Dual Gantry Drive, the Eagle V9 is ideal for inclined surface, spiral contour, irregular contour and other complex machining tasks. Comes with an integrated Heidenhain iTNC-530 control unit and a side opening in the casting to allow robot loading from either side with pallets up to 19.7-inch square.

Designed to excel at small electrode and micro milling, the hybrid HC-435 features a high-rigidity, monoblock structure for a guaranteed static positioning accuracy of ±0.000059" and ±0.000012" repeatability. With an extended speed range of 3,000 through 36,000 RPM, high-speed direct hard milling is possible through dry or semi-dry oil-mist systems. The new HSK-E25 tool holder improves clamping force by up to six times while the Z-axis Balance Cylinder reduces the load for ball screw and servo motor. Operation is easy with the Fanuc 31i-A5 Super High-Speed Processor with AI Contour Control II and NANO Interpolation.

Designed for precision and productivity, the hybrid HC-548EX features a high-rigidity, bridge-type monoblock structure for a guaranteed static positioning accuracy of ±0.000080" and ±0.000060" repeatability. With a speed range of 200 through 32,000 RPM, high-speed direct hard milling is possible through dry or semi-dry oil-mist systems. The new HSK-E25 tool holder improves clamping force by up to six times while the Z-axis Balance Cylinder reduces the load for ball screw and servo motor. Operation is easy with the Fanuc 31i-B5 Super High-Speed Processor with AI Contour Control II and NANO Interpolation.

Designed for high-speed milling, drilling and tapping applications, the hybrid HC-658 II features a high-rigidity, bridge-type monoblock structure for a guaranteed static positioning accuracy of ±0.000060" and ±0.000020" repeatability. With a speed range of 200 through 32,000 RPM, high-speed direct hard milling is possible through dry or semi-dry oil-mist systems. The new HSK-E25 tool holder improves clamping force by up to six times while the Z-axis Balance Cylinder reduces the load for ball screw and servo motor. Operation is easy with the Fanuc 31i-B5 Super High-Speed Processor with AI Contour Control II and NANO Interpolation.

Designed to perform, the hybrid HC-87 II features a high-rigidity, bridge-type monoblock structure for a guaranteed static positioning accuracy of ±0.000078” and ±0.000039” repeatability. With a speed range of 200 through 32,000 RPM, high-speed direct hard milling is possible through dry or semi-dry oil-mist systems. The new HSK-E25 tool holder improves clamping force by up to six times while the Z-axis Balance Cylinder reduces the load for ball screw and servo motor. Operation is easy with the Fanuc 31i-A5 Super High-Speed Processor with AI Contour Control II and NANO Interpolation.

Equipped with heavy-duty roller-type linear guideways, 3-axis linear scales, and a choice of either 15,000 RPM or high power 8,000 RPM direct drive spindles, this massive ultra-rigid 5-axis vertical machining center can easily handle a 4,400-pound workpiece on its 45.3-inch table surface. Offering performing high-precision cuts with the X, Y, Z, A and C-axes moving simultaneously, the MC-12000 is ideal for inclined surface, spiral contour, irregular contour and other complex machining tasks. Unlike conventional worm gear setups, the MC-12000’s dual motor tilting A-axis and high-speed rotary C-axis utilize direct drive motors augmented by rotary encoders.

Produce complicated parts at high speeds with the MC-4000, an advanced, multi-tasking 5-axis vertical machining center with a 15,000 RPM spindle. Compact yet robust, the MC-4000 features a 17.7-inch table surface capable of handling a 440-pound workpiece, plus front and side opening doors for convenient manual and automated part loading and unloading. Complex machining and setup is easy thanks to a 5-axis control configuration, 48-position ATC, BIG Plus CAT-40 tooling and a Heidenhain TNC-640 control with a 19-inch LCD color display.

Produce complicated parts at high speeds with the MC-6000, an advanced, multi-tasking 5-axis vertical machining center with a 15,000 RPM spindle. Featuring a 25.6-inch table surface capable of handling a 660-pound workpiece, plus front and side opening doors for convenient manual and automated part loading and unloading, the MC-6000 delivers accuracy and performance. Complex mid to large-size machining jobs and setup are easy thanks to a 5-axis control configuration, 48-position ATC, BIG Plus CAT-40 tooling and a Heidenhain TNC-640 control with a 19-inch LCD color display.

Complex cutting is easy with the MC-8000, an ultra-rigid gantry-type 5-axis vertical machining center that can handle a 2,200-pound workpiece on a 31.5-inch table surface. With a U-shaped base, dual-motor tilting A-axis support and a high-speed rotary C-axis table, the MC-8000 offers highly precise inclined surface, spiral contour and irregular contour machining with simultaneous X, Y, Z, A and C-axe cutting. With two opening doors in front and a sliding roof system, the MC-8000 lends itself to both manual and crane part loading and unloading. Operation is easy thanks to the Heidenhain TNC-640 control with a 19-inch LCD colour display.

Suited to a wide array of applications, the MCV series from Mitsubishi features a 12,000-RPM direct drive spindle and BIG Plus CAT 40 tooling. Operation is quick and easy thanks to the Mitsubishi M80A control with 10.4-inch touchscreen and new CNC-Dedicated CPU providing up to 135,000 BPM (block per minute) calculation speed.

Designed for small-hole drilling and micro-fine milling, the MEGA SS-400/600 features a high-rigidity, bridge-type monoblock structure for a guaranteed static positioning accuracy of ±0.000059" and ±0.000012" repeatability. With an extended speed range of 3,000 through 40,000 RPM, high-speed direct hard milling is possible through dry or semi-dry oil-mist systems. The new HSK-E25 tool holder improves clamping force by up to six times while the Z-axis Balance Cylinder reduces the load for ball screw and servo motor. Operation is easy with the Fanuc 31i-A5 Super High-Speed Processor with AI Contour Control II and NANO Interpolation.

Featuring heavy-duty box-way construction in X, Y and Z axes, the SV SV-1000~1300B handles large tools and bigger parts with speed and precision. Designed for heavy-duty machining and high-speed cutting with maximum material removal, its hand-scraped Tercite B way guides offer long-lasting accuracy while its Meehanite cast-iron structure provides unparalleled stability. Enhanced ribs in major construction parts provide the rigidity and stability for heavy-duty, high-speed cutting.

The TV-500 is an accurate multi-axis drilling and tapping machine that offers fast and simple tool changes for smooth operations. Choose between a 12,000, 20,000 or 24,000-RPM high-speed spindle driven by a 4.6-kw motor. BBT30 dual-contact tooling delivers extra rigidity and better Z-axis depth control during operation while advanced PLC software and Mitsubishi controls drive a bi-directional CAM-driven tool magazine for rotation, accuracy and smooth motion even while large tools are loading.

The TV-700 is an accurate multi-axis drilling and tapping machine that offers fast and simple tool changes for smooth operations. Choose between a 12,000, 20,000 or 24,000-RPM high-speed spindle driven by a 4.6-kw motor. BBT30 dual-contact tooling delivers extra rigidity and better Z-axis depth control during operation while advanced PLC software and Mitsubishi controls drive a bi-directional CAM-driven tool magazine for rotation, accuracy and smooth motion even while large tools are loading.