OMAX MICROMAX

The MicroMAX JetMachining Center is the ideal solution for ultra-precision abrasive waterjet machining. Utilizing advanced high precision optical linear encoders, innovative vibration isolation, and proven software control systems, the MicroMAX JetMachining Center is capable of a positioning accuracy of less than five microns while retaining all the advantages of abrasive waterjet machining. It comes standard with a precision 7/15 Mini MAXJET® 5 Nozzle. The MicroMAX JetMachining Center cuts without heat-affected zone (HAZ), so no secondary processing is required. The MicroMAX JetMachining Center can machine stainless steel, titanium, carbon fiber, PEEK, glass, nitinol, graphite, copper, composites, laminates, and more, with high precision and smooth finishing, for either prototyping or production.

specifications

Machine Dimensions

Footprint * – (L x W) 6' 2" x 7' 0"
Height ** 7' 0"
Weight (tank empty) 3,800 lb

Work Envelope

X-Y Cutting Envelope *** 2' 1" x 2' 1"
Z-Axis Travel *** 4.5"
Table Size – (L x W) 2' 11" x 3' 0"

Standard Model Specifications

Speed 100 in/min
Linear Positional Accuracy ±0.0001"
Repeatability ±0.0001"
Ballbar Circularity ±0.0005"

Features

  • Small, efficient footprint for minimal floorspace utilization
  • Very high precision with 0.1 micron linear optical encoder system
  • Highly rigid structure with low mass bridges and carriages
  • Stiff construction greatly reduces vibration and increases accuracy
  • Vibration isolation of table and gantries
  • All components have matched thermal expansion
  • Revolutionary patent-pending process for fine abrasive feed rate
  • Full enclosure with environmental controls provides quiet, safe and clean operation below 80db
  • Advanced pressure controls for piercing delicate materials
  • No heat-affected zones or mechanical stresses
  • Standard OMAX 7/15 Mini MAXJET 5 Nozzle acquires finer precision cutting capability with a 0.007" orifice and a 0.015" mixing tube combination
  • Standard Tilt-A-Jet taper eliminating abrasivejet cutting head
  • Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
  • Machines a wide range of materials with high accuracy
  • Can machine hardened steel as easily as annealed steel
  • Easily cut non-conductive and reflective materials
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • Shipped as a completely pre-assembled and factory-tested system
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA

Fastest response times on consumable orders

We have Canada’s largest inventory of waterjet garnet abrasive and replacement parts for waterjet cutting machines and EDM consumables

order now

free
test cut

We will perform a test cutting and ajust our machine according to your precessing requirements.

Ask for a test