MC-8000 (5-AXIS)

Complex cutting is easy with the MC-8000, an ultra-rigid gantry-type 5-axis vertical machining center that can handle a 2,200-pound workpiece on a 31.5-inch table surface. With a U-shaped base, dual-motor tilting A-axis support and a high-speed rotary C-axis table, the MC-8000 offers highly precise inclined surface, spiral contour and irregular contour machining with simultaneous X, Y, Z, A and C-axe cutting. With two opening doors in front and a sliding roof system, the MC-8000 lends itself to both manual and crane part loading and unloading. Operation is easy thanks to the Heidenhain TNC-640 control with a 19-inch LCD colour display.

specifications

Machine Travels: X x Y x Z in (mm) 31.5 x 35.4 x 24.4 (800 x 900 x 620)
A-Axis Tilt Range: (degree) ±120
C-Axis Rotation Range: (degree) 360
Spindle Speed: RPM 15,000
Cutting Feedrate: in/min. (mm/min.) 0.04 - 787 (1 - 20,000)
Table Size Dia. : in (mm) 31.5 (800)
Max Table Cap: lb. (kg) 2200 (1000)
Spindle HP: (cont./30 min) 15 / 20
Spindle Nose to Table: in (mm) 3.9 ~ 28.3 (100 ~ 720)
Arm Type ATC: Tool Count / Tool Taper 32 / BIG Plus Cat-40 (+ 32 T Option)
Max Tool Dia. w / wo Adj. Tool: in (mm) 3.0 / 5.0 (76 / 127)
Max Tool Length / Weight: in/lb. (mm/kg) 11.8 / 15.4 (300 / 7)
X, Y, Z Rapid Speed: in /min. (m/min.) 1890 (48)
A/C Axis Rapid Speed: RPM 75/100
Machine Weight: lb. (kg) 41,887 (19,000)
Power Requirements: [KVA] 42
Coolant Cap: gal (L) 79 (300)
Mach Dimensions WxDxH: in (mm) 178.3 x 88.2 x 141.9 (4528 x 2240 x 3605)

Features

  • Full Enclosure with Top Guarding
  • 15,000-RPM Direct Drive Spindle
  • Spindle Oil Chiller 
  • 32-Position Direct Drum Type (+32-Pos Option)
  • BIG Plus CAT-40 Tool Taper
  • X-Y-Z Linear Glass Scales
  • B/C-Axis Optical Rotary Encoders
  • Heidenhain TNC-640 control
  • 19" TFT LCD Color Display Screen
  • CTS (Coolant Through Spindle Preparation) (1000 psi)
  • Spindle Coolant Ring
  • Roller Pack LM Guideways
  • Auto Oil Lube System
  • Chip Conveyor
  • Blum TC50 Workpiece Measurement
  • Blum NT-A2 Tool Length/Diameter Measurement
  • Kinematics Software + Calibration Ball
  • Wash Down Water Gun
  • 220 Volt Transformer
  • Machine Lamp
  • Disc oil coolant separator
  • Leveling Bolts and Pads
  • Instruction Manuals
  • Electrical Schematics
  • Accuracy Test Documentation
  • Spindle Load Meter

Plan / layout

Fastest response times on consumable orders

We have Canada’s largest inventory of waterjet garnet abrasive and replacement parts for waterjet cutting machines and EDM consumables

order now

free
test cut

We will perform a test cutting and ajust our machine according to your precessing requirements.

Ask for a test