4900 Ambroise-Lafortune
Boisbriand, Quebec, J7H 1S6


Designed to perform, the hybrid HC-87 II features a high-rigidity, bridge-type monoblock structure for a guaranteed static positioning accuracy of ±0.000078” and ±0.000039” repeatability. With a speed range of 200 through 32,000 RPM, high-speed direct hard milling is possible through dry or semi-dry oil-mist systems. The new HSK-E25 tool holder improves clamping force by up to six times while the Z-axis Balance Cylinder reduces the load for ball screw and servo motor. Operation is easy with the Fanuc 31i-A5 Super High-Speed Processor with AI Contour Control II and NANO Interpolation.


Machine Travels: X x Y x Z in (mm) 33.5 x 29.5 x 16.0 (850 x 750 x 400)
Spindle Speed 200 ~ 32,000 RPM
Spindle HP 8.4
Spindle Lubrication Grease Packed
Tool Changer Size 12 Position Standard
Positioning Accuracy/Repeatability: in (μm) ±0.000120/±0.000040 (±3.0/±1.0)
Table Work Area X x Y: in (mm) 37.4 x 29.5 (950 x 750)
Table to Spindle Nose Distance: in (mm) 8.8 ~ 24.6 (225 ~ 625)
Max. Workpiece Weight: lb (kg) 440 (200)
Coolant Tank Capacity: gal (L) None
Table Height from Floor: in (mm) 31.5 (800)
Actual Measured Circularity (2.0" dia. @8 IPM): in (μm) 0.000098 (2.5)
Spindle Taper HSK-E40
Spindle Air Purge Standard
Air Blast through Spindle Standard
Oil Mist with Collector Optional
Linear Scales X, Y, Z - axes Heidenhain 0.00001mm Standard
Rapid Traverse Speed: in/min. (m/min.) 787 (20)
Cutting Speed (Normal Mode): in/min. (mm/min.) 0.01 - 315 (0.25 ~ 8000)
Cutting Speed (GR Super PC Mode): in/min. (m/min.) 394 (10)
Dust Collection System Amano PiE-30 Standard
Machine Weight: lb (kg) 15,500 (7030)
Machine Height: in (mm) 115.5 (2935)
Required Floor Space [Machine Unit]: in (mm) 134 x 134 (3400 x 3400)
Control Unit Fanuc 31i-A5 with RISC Processor
Power Requirements KVA 200 ~ 220V 22KVA
Air Supply 26.5 cu.ft./min @ 72 psi


  • High-rigidity structure for high-speed, high-precision hard or graphite milling
  • Greater stability for positioning accuracy and repeatability
  • High-speed direct hard milling is possible via dry or semi-dry oil-mist systems


  • Super Hybrid Concept - Hard Milling or Graphite
  • Highly Rigid Structure
  • Extended Speed Range - 200 through 32,000 RPM
  • High Rigidity Tool Holders
  • Z-axis Balance Cylinder
  • Fanuc 31i-A5 64 bit RISC Controller with HPCC (High Precision Contour Control)

Plan / layout

Fastest response times on consumable orders

We have Canada’s largest inventory of waterjet garnet abrasive and replacement parts for waterjet cutting machines and EDM consumables

order now

test cut

We will perform a test cutting and ajust our machine according to your precessing requirements.

Ask for a test