NX-F SERIES

specifications

Model NX-F 3015
Machine Travels: X x Y x Z in (mm) 125.9 x 62.9 x 4.7 (3200 x 1600 x 120)
Workpiece Dimensions: W x D in (mm) 120.1 x 60.0 (3050 x 1525)
Available Resonators: (model number/wattage output) YLS-4000, YLS-2500
Motion Drive System Design Helical Rack & Pinion
Processing Lens Focal Distance: in (mm) 4.0/8.0 (101/203)
No. of control axes 3
Machine Structure X-Y Helical Rack & Pinion, Z Precision Linear Drive
Travel Drive Method X-Y-Z Simultaneous 3-axes (Z axis height control is also possible)
Table Pass Height: in (mm) 34.6 (880)
Processing Access Manual Door
Pallet Changer Provided
Rapid travel speed [X,Y]: in/min. (m/min.) 4724 (120) single axis, 6680 (170) simultaneous
Max. processing feedrate: in/min. (m/min.) 2360 (60)
Positioning Precision: in (mm) 0.0019/20 (0.05/500) X, Y axis, 0.0039/4 (0.01/100) Z-axis
Repeatable accuracy [X,Y]: in (mm) +/-0.00039 (+/-0.01)
Drive Motor Type Intelligent AC Servo
Max. workpiece weight: lb (kg) 2050 (930)
Installation Dimensions (W x D): in (mm) 354.7 x 480.3 (9009 x 12,200)
Machine Unit Dimensions (W x D x H): in (mm) 116.2 x 408.3 x 88.6 (2951 x 10,371 x 2250)
Machine System Weight: lb (kg) 27,845 (12,630)
Floor Space Req. sq. ft. (m2) 1183 (110)
Type Self contained PC NC
CPU 64-bit
Display screen 15" TFT color LCD touch screen
Hard disk 20.0 GB
Generator output control Output Power, Frequency, Duty
Generator operation control Beam ON/OFF, laser gas change, etc.
Drive system X,Y,Z simultaneous control
Position detection system Encoder
Min. command unit: in (mm) 0.0001 (0.001)
Program input system USB, Computer Link, Eternet LAN

Overview

Mitsubishi’s new fiber laser technology ushers in a new era of laser processing performance. Fusing our world leading laser processing machines, rich in history and technical prowess, with an advanced fiber laser beam, we’ve evolved laser processing to an entirely new level of performance. The NX-F 3015 two-dimensional fiber laser processing system comes standard with a fiber laser resonator and a z-axis linear drive, a preset auto focus processing head and a safety cover. The Mitsubishi 700 series control with 64 bit NC and a 15 inch touch screen NC panel is the latest most sophisticated control from Mitsubishi. The machine also features a Multi chamber dust-collection mechanism, and a camera for material alignment.

Features

  • Mitsubishi’s High-speed Control for Lasers (MHC-L): this original control method maximizes fiber lasers high speed cutting capability. Controls beam on/off timing in 1 U sec increments.
  • Timing calculator allows the machine to deliver fast rise time when the laser needs the power.
  • F-Cut – features the beam on/off time and axial movement simultaneously to eliminate the need for axes to stop.
  • Head position camera with display under the control for ease of operation allows the operator to make head adjustments even if the work piece is far away
  • Eco Mode reduces cost during standby by up to 70%
  • Step by Step maintenance guidance provide ease of use for operators no matter what the experience level
  • Power Control system provides power stability of +/- 1%
  • Automatic Focusing allows for easy and consistent focusing
  • Helical Rack and Pinion offer improved contact ratio which can lead to improved accuracy
  • Automatic Lubrication of Motion System
  • Dross Reduction Control

Fastest response times on consumable orders

We have Canada’s largest inventory of waterjet garnet abrasive and replacement parts for waterjet cutting machines and EDM consumables

order now

free
test cut

We will perform a test cutting and ajust our machine according to your precessing requirements.

Ask for a test