Home About News Contact
1-866-772-7526
       
Search OK
Waterjet Garnet Waterjet Parts EDM Supplies Band Saws Used Machines
 
OUR PRODUCTS  
Omax Waterjet
Maxiem Waterjet
KMT Waterjet
PAR Waterjet
Waterjet Cutting Robots
Maxiem Waterjet The MAXIEM is an abrasive waterjet cutting system starting at $70,000 with an X-Y table containing Intelli-TRAX™ traction drive technology and a Motorized Z-Axis. The proven high-pressure direct drive pump technology waterjet machine run’s at 50,000 psi and is available in 20 and 30 horsepower options. All MAXIEM waterjets feature Intelli-MAX® Basic, a control containing the core functionality of OMAX’s critically acclaimed software.

Table sizes currently available:
  • MAXIEM 1515 at 92 inches x 69 inches (2,337 mm x 1,752 mm).
  • MAXIEM 1530 at 151 inches x 69 inches (3,835 mm x 1,752 mm).
  • MAXIEM 2030 at 151 inches x 81 inches (3,835 mm x 2,057 mm).
  • MAXIEM 2040 at 189 inches x 81 inches (4,801 mm x 2,057 mm).

Waterjet Applications

Industry Solutions
Waterjet technology is used in so many industries and continues to be used as a solution in various areas where other machine tools cannot accomplish specific cutting projects. The abrasive waterjet is one of the most environmentally-friendly cutting equipment you will find in the industry with the use of water and garnet pressurized to cut almost any material accurately and with precision.

Advantages of Using a Maxiem JetCutting Center
The MAXIEM provides a great advantage over other machine tools. For diverse waterjet applications, the MAXIEM can cut a wide range of materials with no required changes in setup. In addition, any material that is heat-sensitive can be cut using the MAXIEM. When cutting with waterjet technology, there is no heat-affected zone or thermal distortion, which can occur when operating other machine tools. Cutting thick material can be handled easily with a MAXIEM, and its simple maintenance creates a cost-effective solution to any shop. The MAXIEM waterjet system eliminates secondary machining steps saving you time and money.

Versatility of using a Maxiem Waterjet
Controlling the jet stream on the MAXIEM waterjet is made simple with our OMAX Intelli-MAX® Software, the only waterjet software written exclusively for waterjet systems. A waterjet provides greater versatility over other machine tools since you can cut various materials and thicknesses. Materials commonly cut with a waterjet include rubber, foam, plastics, composites, stone, tiles, metals, and much more.

Here are some areas that you might find a waterjet: Fabrication Shops, Metal Service Centers, Trade Schools, Job Shops, Architectural, Sign, Stone, Gasket, and many others.

Typical Applications
  • Job Shops:Produce a wide variety of short-run parts
  • Wire EDMShops: Save valuable machine time where Waterjet machines tolerances are acceptable.
  • Laser Shops and Aerospace Industry: Work with materials that are affected by heat (such as titanium, and aluminium) or materials that laser can not cut (such as thicker metal or composites).
  • Prototype and R&D Shops: Work directly from CAD drawings.
  • Maintenance and Repair Shops:Quickly produce one-off parts.
  • Original Equipment Manufacturers:Control Just-in-Time inventory requirements.
  • Metal Fabricators: Offer "clean edge" plate work, such as brackets, machine parts and weldments.
  • Architectural Fabricators:Lets you create complex designs in glass, stone, tile and metal with Water jet cutting.
  • Waterjet Specialty Shops: Makes parts with higher tolerance than any other waterjet system.
  • Industrial Manufacturers: Minimize scrap when working with expensive materials.
 
FEATURED PRODUCT
    Spark & Co. - Copyright 2010
Design by Canada MEDIA